Home / Contact
Contact Us
Contact a Contract Chemical Manufacturer in the UK
Submit Your Chemical Processing Enquiry
We're here to help. Reach out to our team and we'll get back to you as soon as possible.
Speak to our Chemical Manufacturer Experts in Hartlepool
Every complex project starts with a simple conversation. As a leading contract chemical manufacturer in the UK, Exwold believes that it’s good to talk (especially when you’re facing a technical challenge that needs a real-world solution). Our team combines deep industry expertise with a genuinely approachable style, helping you navigate everything from initial formulation to full-scale prod
enquiries@exwold.com
Phone Number
+44 (0)1429 230340
Main Address
PO Box 270, Brenda Road, Hartlepool, TS25 2BW, UK
Phone Number
+44 (0)1429 230340
enquiries@exwold.com
Postcode
TS25 2BU
Phone Number
+44 (0)1429 230340
enquiries@exwold.com
Postcode
TS25 2DL
Phone Number
+44 (0)1642 564119
enquiries@exwold.com
Postcode
TS31 1 PZ
Phone Number
+44 (0)1429 890954
enquiries@exwold.com
Postcode
TS25 2BS
Phone Number
+44 (0)1429 890954
enquiries@exwold.com
Postcode
TS25 2BS
Frequently Asked
Questions
Can you perform batch processing?
Exwold specialises in batch processing. Batch sizes vary from a few hundred kilograms to tens of tonnes. We also have continuous processing available with extrusion processes.
Do you sell your own products?
No. Exwold specialises in contract manufacture and in order to avoid any conflicts of interest with our clients, we have chosen to specialise only in contract processing and do not offer our own products.
Can you carry out multi-stage processing?
Yes our expertise and flexible plants allow us to combine processing technologies, for example, we regularly combine blending with our granulation capabilities.
What is your minimum order quantity for processing?
Exwold typically works in the 10 to 1000 tonnes range for clients but processes can be evaluated and adapted on a case by case basis depending on process requirements.
Our pilot facility allows us to produce trial quantities and the High Active Herbicide facility is designed to produce in volumes of 100Kgs upwards.
Can we visit Exwold to perform an audit?
We welcome all our clients to our sites so they can perform audits. We have accreditation to ISO 9001/14001/45001 standards and are looking for continuous improvements in our quality systems, so encourage all customer feedback.
Can you process foodstuffs and pharmaceutical products?
Our expertise is in the speciality chemical and agrochemical markets and as a consequence. Exwold does not currently offer services to the food or pharmaceutical markets.
Can you purchase raw materials for clients as well as manufacture?
Typically our customers prefer to source their own materials but Exwold is willing and able to source raw materials when required.
Our purchasing department can offer expert assistance in sourcing raw materials and packing requirements.
Can you do pre-production trials?
Yes. Our technical department is fully trained to perform and support pre-production trials. We often encourage trials before production so that we can evaluate any technical challenges and arrive at an accurate costing.
The technical development centre is well equipped to enable us to test all the technologies we have at scale.
Can you process solvents?
We tend to work mostly in aqueous phase, but can evaluate opportunities with solvents which have a flash point of >60°.
What quality, environmental and health and safety systems do you operate?
Exwold is certified to the ISO 9001/14001 standards.
In 2019 Exwold gained ISO 45001.
Where are you based?
We have five manufacturing sites which are all based in the North East of England near the town of Hartlepool.
This area has exceptional transport links to the rest of the UK and Europe.
Would you be prepared to buy capital equipment to meet a client’s processing needs?
At Exwold we regularly work with customers in this way and our engineering team can offer in-house expertise in plant modifications and design.
With our clients we have jointly invested over £4 million in plant and equipment.
Should we have concerns regarding contamination?
This is of critical importance to Exwold and it is the most asked question by our clients.
We have sophisticated clean-down procedures for every piece of processing plant and all our plants are accredited with ISO 9001/14001 status.
We operate a plant dedicated to high active herbicides and have warehousing and manufacturing separation between herbicides and insecticides.
Products are tested by a third party analytical company to detect residual impurities to low ppm levels.
Is Exwold sustainable?
Yes. Sustainability is a core focus at Exwold. We continuously invest in renewable energy, such as the solar panels at our Tofts Farm plant, and are actively installing new equipment across all sites to reduce plastic waste and environmental impact.
What type of packing does Exwold provide?
Exwold offers packing as an added value to bulk manufacture. We often hold the bulk in stock providing the ultimate flexibility to pack off as required.
We can pack small bottles for high active herbicides (100-1000g).
We are used to handling multiple packing SKUs for products and we pack from 1kg to 1000kgs in a variety of packaging types, including jerricans, paper and foil bags, kegs, FIBCs and bottles.
Can you provide supply product with 2D matrix labelling?
Yes. We have been investing in this capability following the regulatory requirement to include this when supplying crop protection products to countries such as France and Turkey.
How much will you charge me?
We look to offer competitive rates and, since every processing job is bespoke, we evaluate every opportunity on a case by case basis.
We are able to provide indicative prices at early stages of discussion to ensure project viability.
I know I want a granule made but not sure of how, can you help me?
Our technical team can help to determine which technology is best using their expert granulation knowledge and by asking a few simple questions such as granule size, specific physical properties required and application. From this they will suggest the best options to fulfil your needs.
The Technical Development centre can be used to assess whether this technology produces your desired granule and can support customer trials.